Stone carpet, interior photo
Service

Stone carpet

Natural stone or marble pebbles bound with clear resin into one surface. It goes on floors and walls, indoors and outdoors.

What it is

What is stone carpet

Stone carpet consists of natural stone or marble pebbles in calibrated sizes, bound with clear resin into a single open-pored surface. We work with the ARDEX stoneCARPET system. It is laid by hand on floors, walls, terraces or around pools.

There is a permeable version with an open structure for exteriors, terraces and courtyards, where water drains away by itself. Indoors, a closed, polished version is laid.

The surface has no joints, is hygienic and non-slip, does not fade in the sun and withstands wear, chemicals and stains. You can feel it under bare feet, which is the whole point around a pool.

Request an estimate for stone carpet

Two-tone stoneCARPET beside a natural stone wall. Stone carpet (resin-bound stone), installed by Ardes
Two-tone stoneCARPET beside a natural stone wall. Photo: Ardes archive
Uses

Where stone carpet is used.

Stone carpet is used in these spaces, with the right protective topcoat and a properly prepared substrate.

01 / Terraces

Roof and ground-floor terraces. Non-slip, lets water through and does not fade in the sun.

02 / Pools

Pool decks, shower areas and outdoor walkways. The open structure drains the water away.

03 / Wellness

Spa areas and sauna anterooms. A surface you can feel underfoot that lets water through.

04 / Public spaces

Healthcare facilities, hotels and restaurants, where a hygienic, hard-wearing surface is needed.

05 / Feature walls

Interior walls with character. Stone you can feel under your hand.

Palette / 6 blends

What stone carpet is made of

Marble and natural stone pebbles in calibrated sizes: 2 to 4, 4 to 8 and 8 to 12 mm. Clear resin binds the colour, mineral and shape into one open-pored surface.

SC · 012–4 mm
Carrara
SC · 044–8 mm
Bardiglio
SC · 074–8 mm
Botticino
SC · 114–8 mm
Rosa Verona
SC · 152–4 mm
Verde Alpi
SC · 194–8 mm
Nero Ebano

The colour of the pebbles on screen is approximate. We make a sample with a test bond on site, on your own surface.

Benefits

What you get

  • 01An open, permeable structure for outdoor use, with no drains needed.
  • 02Non-slip, so it is safe around pools and in shower areas.
  • 03UV-stable and resistant to frost and temperature swings.
  • 04Hygienic and jointless. Withstands wear, chemicals and stains.

Request an estimate

Installation process

Four steps, all by hand.

It all starts at your place, with an assessment of the space and the substrate. How long it takes depends on the floor area and on the condition of the substrate.

01

Choosing the pebbles

Colour, mineral and grain size, with a sample made on site and a test bond.

02

Preparing the base

Waterproofing (for exteriors), priming and checking the fall for drainage.

03

Mixing

Mixing the dry pebbles with clear resin in a precisely measured ratio.

04

Installation

Spreading by hand and levelling with a trowel until the resin takes hold of the structure.

FAQ

Common questions.

Stone carpet: answers to the questions we hear most often from clients and the designers behind their projects.

  • Stone carpet is a surface of natural stone or marble pebbles bound with clear resin into a single jointless layer. It is laid by hand on floors and walls, indoors and outdoors. We work with the ARDEX stoneCARPET system, with pebbles in calibrated sizes from 2 to 12 mm. You can feel the material under bare feet, which is why it is most often chosen for terraces and pool surrounds.

Enquiry

Send a quick enquiry.

Your enquiry will be tagged for Stone carpet. We get back to you with an estimate and a suggested appointment to see the samples.

We follow the same process on every project, from a flat to an office building.

Emailinfo@ardes.rs

This enquiry is about Stone carpet.

An enquiry is not an order and does not commit you to anything.
CallRequest an estimate